Water quality 5 min read

Nine warning signs of water contamination in a building

Most contamination in building water systems does not announce itself. But there are indicators that should always prompt investigation, and some of them are visible to anyone walking around the building.

Visible signs

Discoloured water at a tap usually means iron or sediment from a corroding tank or pipework. Black or slimy deposits around a tap or shower head indicate biofilm. Sediment visible in the bottom of a tank, or in a toilet cistern, is material that is also present in the water supply to outlets.

  • Brown, orange or cloudy water when a tap is first run
  • Sediment in the tank, cisterns or strainers
  • Black, slimy or pink deposits around outlets and shower heads
  • Musty, earthy or chlorine-excessive odour
  • Visible corrosion, pinholes or water staining on the tank body

System indicators

Warm cold water is one of the most common and most treated-with-apathy findings on site: it frequently means the storage tank or its feeder pipework is uninsulated or the tank room is heated, which is exactly the condition Legionella needs. Cold water should be below 20°C; hot water should reach 55°C within one minute at the outlet and be stored at 60°C.

A failing TMV — outlet temperatures that wander, or hot water at a cold tap — is a scalding risk as well as an indicator of poor maintenance. Poor flow, knocking pipes and persistent air in the system can point to blockage or scale.

Records and results

A single unsatisfactory laboratory result, a rising trend in total viable counts, an unexplained positive Legionella sample after remediation, or monitoring records with gaps in them — all indicate that the written scheme of control is not doing what it claims. Records are part of the system: if they are incomplete, the system is, for practical purposes, uncontrolled.

What to do next

Where any of these signs are present, investigate before dosing. That means inspecting the tank and system condition, reviewing the schematic against what is actually installed, checking temperatures and sampling the points that will identify the source. Remedial action without diagnosis tends to cost more and work less well.

This article is general guidance, not a site-specific risk assessment. Control measures for your building should follow your written scheme of control and the Approved Code of Practice L8 with HSG274.