
Legionella Sampling & Testing
Bradford, Leeds & Yorkshire
Representative water samples taken to HSG274 Part 2 procedure, analysed by an independent laboratory, with results explained in plain language and a clear recommendation of what to do next.
What the service covers
A Legionella sampling programme is the evidence layer of any water hygiene regime. Temperature monitoring and visual inspection tell you whether the system is likely to be controlled; sampling tells you whether Legionella bacteria are actually present in the water, and at what concentration.
We attend site and take samples from the agreed sample points on your risk assessment — incoming cold supply, tank outlet, calorifier flow and return, representative sentinel outlets, and the furthest and least-used outlets on each range. Bottles are prepared with the correct neutralising agent, temperature and free chlorine residual are recorded, and samples are dispatched to an independent laboratory for culture, with results typically returned within 10 to 14 days for Legionella and sooner for total viable counts.
We cover Bradford, Leeds and the surrounding West Yorkshire districts on a scheduled basis, and we can build a named sample point register for a single building or a multi-site portfolio so that every result is comparable month to month and year to year.
Our process, step by step
Frequently asked questions
How often should Legionella samples be taken?
Frequency is determined by the written risk assessment for the site. A well-controlled hot and cold water system is commonly sampled every six months, while systems with previously unsatisfactory results, little-used outlets, calorifiers or cooling systems are usually sampled more often, sometimes quarterly or monthly. We recommend sampling as part of a scheduled monitoring programme rather than on an ad-hoc basis.
Do you take the sample or does the laboratory?
Our engineers attend site, complete the site register and take the sample following the sampling procedure in HSG274 Part 2 — appropriate bottles, correct neutralising agent, temperature and residual chlorine recorded at the point of sampling. The sample is dispatched to an independent laboratory for culture and analysis.
What is the difference between a swab and a water sample?
A water sample tells you what is present in the circulating water at that moment. A swab taken from inside a tank outlet, shower head or calorifier base tells you what is living in the biofilm, which is often where the problem persists. Where results are inconsistent or repeat failures occur, we recommend both.
Can you help if we get an unsatisfactory result?
Yes. We interpret the result against the HSG274 action limits, advise on the immediate response — which can range from resampling and outlet flushing to disinfecting the system — and carry out the remediation work where you want us to.
Related services
Water sampling & analysis
The full sampling service, including TVC, coliform, Pseudomonas and closed system parameters.
Emergency water sampling
Rapid response sampling after a positive result, illness report or visible contamination.
CWST cleaning & disinfection
The remediation step when tank conditions or results require cleaning and chlorination.